|
Zenec ZE-NC3810
The new E>GO naviceiver generation sticks out with a truly comprehensive feature set and state of the art functionality. E>GO naviceiver - 100 % custom-fit Navigation, entertainment, communication – the ZE-NC3810 naviceiver is a complex navigation and multimedia system with a large range of features. ZENEC‘s new top-of-the-line model fits together visually with FORD Mondeo, Focus and S-Max. The red button illumination and the customized design of the front panel makes the E>GO not only perfect for the respective look of the car interior, but the E>GO is also effortlessly integrated into the existing automotive electronics. ZE-NC3810 can be installed into the original dash board of the above named automobiles without further modifications and without any additional adapters: simply take out the factory radio, put in the E>GO and drive off. Even the connection of the factory-made steering wheel remote control is no problem: simply connect the E>GO to the existing plug – the functionality of the factory installed components is preserved. ZENEC E>GO – ingeniously easy, visually perfect.
The general features When it comes to the top-of-the-line naviceiver equipment, all wishes have been fulfilled: The built-in CD/DVD drive plays all the current A/V formats. The electrical and mechanical anti-shock system provides for perfect image and sound fidelity during the ride. In addition to an RDS tuner for the best radio reception, the ZE-NC3810 is also equipped with an integrated digital power amplifier (4 x 50 watts) and a Dolby digital decoder. The E>GO has a USB-Port and a SD/SDHC card reader so music, movies, multimedia files or photos can be easily played back. The card slot is easily accessible on the front and is useable for SD and SDHC cards up to 8 GB of memory. The perfect integration Factory-installed steering wheel remote controls stay fully functional with E>GO: The A/V functions of the E>GOs are connected to the steering wheel remote control via Interface with the FORD CAN-Bus. Each A/V source (radio, MP3, USB, etc.) including the hands-free function can be easily operated – ex factory - via the steering wheel remote control. The main GUI Simple and totally straightforward operation has been one of the most critical points taken into account when this naviceiver line up was developed. The graphic user interface (GUI) is well structured and for best usuability, it has been separated in two main GUI start pages. The often cited “intuitive operation” has a really new meaning when it comes to the ZE-NC3810.
The Bluetooth interface
Make phone calls and play music from your mobile phone: ZENECs Naviceiver let s you easily establish and use a connection to a Bluetooth enabled mobile, offering a wide variety of optimized Bluetooth protocols. You do not need any installation kits, fixtures, cables, or even additional speakers in the vehicle‘s interior. Audio streaming
Convenient hands-free talking The new Parrot Bluetooth module marks an improvement in mobile communication: advanced signal processing technology, the so called Parrot Beamforming, is provided through a multi-directional, freely positionable microphone which is easily attached to the A-column. With this technology, all surrounding noises and echo effects are eliminated so that the voice is clearer. In cases where an externally mounted microphone is no option, an internal microphone is provided as well.
Additional Bluetooth features
The Bluetooth component firmware from ZE-NC3810 can be conveniently updated using a USB stick or SD card, for example if you would like to use a new mobile phone model or business phone in the car. The palette of compatible mobile telephones can be expanded at any time – with the ZE-NC3810 you are always up-to-date. The GPS navigation Navigate unerringly via touchscreen in all of western and eastern Europe – with its integrated navigation system, the naviceiver ZE-NC3810 reliably shows you the way in more than 43 countries. Due to the 400 MHz CPU (128 MB SD RAM) and the customized Nav-Engine software iGO8, the route calculation is very fast. Searching the destination Enter the desired destination thereby choosing between the various destination and route entries – through address, ZIP/postal code, POI, saved/last found destinations. etc. – and you are ready to go. Your electronic copilot guides you to your destination without detours and shows you, if you so wish, relevant points such as gas stations, hotels, restaurants, parking lots, etc.
The automatic zoom at intersections or traffic circles makes sure that there is no confusion even at difficult locations. Tunnel mode and lane assistant plus the 3-D landscape or 3-D city map views (with buildings, places of interest, and city maps) simplify the navigation just as well as the highway split screen mode with real signpost rendering (the display of signs in real-time on the map).
To activate the TMC Pro service of the ZE-NC3810 naviceiver, you have two options at hand: 1) Buy a prepaid activation card at your authorized ZENEC dealer, the item is called ZE-NC-TMCPRO, or else 2) buy and download the license directly over Naviextras with your credit card. Map updates via Naviextras
Conneting USB and iPhone/iPod Especially practical: USB-Port with iPod connection and plug 3.5 mm A/V port are in the included, very compact media-link box. With the help of this box (1.5 m cable extension), which can be easily placed in the center console or in the glove compartment, you can quickly connect and disconnect additional components. iPod and iPhone can be connected to the media link box with the adapter cable ZE-NC-IPS (available separately). The connection using the USB high speed bus not only allows for quick access to all files, but also the control of videos via the naviceiver touchscreen. Naturally the iPod and iPhone are being charged during playback. ZE-NC-IPS E>GO compatible cars
FORD Mondeo from 2007 FORD Focus from 2007 FORD S-Max from 2008 ∗ The ZE-NC3810 is compatible with all derivatives of existing models such as ST, RS, Coupe or Convertible respectively. In addition, please note as follows:
Extend your E>GO ZENEC All-In-One - this does not mean only full compatibility to all popular audio and video formats, but also the easy integration of further ZENEC devices like DVB-T tuner, rear view cameras or monitors for perfect rear zone entertainment.
E>GO features overview: The integrated DVD/CD/MP3/WMA player
The integrated LCD monitor
The RDS-tuner
The GPS-Navigation system
The A/V-connections
The additional features
WARNING: An Error occurred, please refresh the page and try again. |
The ZE-NC3810 is equipped with an advanced CK5050+ Bluetooth system from Parrot. This makes playing music from a mobile phone and making phone calls in the car as simple as child‘s play.
